We recommend placing a Speedwrapper every 10 bulbs. A standard strand has 12 Speedwrappers, allowing you to place them 10 bulbs apart on a 300 bulb strand.  (If you feel you need more control over your strand you can add more speedwrappers to the strand).

There are numerous ways to use Speedwrapper. Here are the two most common.

• Take a single 300 bulb strand of lights, apply Speedwrapper and you convert the 300 bulb strand into the length of a 100 bulb strand (It still gives you the coverage of your original 300 bulb strand).

• Take 3 x 100 bulb strands, apply Speedwrapper and you have created a 300 bulb strand. You’ll wrap this 300 bulb strand in the time it takes to wrap 100 bulbs.

• To apply the Speedwrapper to your lights, we recommend using a 1″x4″ board.  Cut a couple of grooves into the board and then secure to a table top. Slip your lights into the notches and then apply the Speedwrappers every 7 to 10 bulbs. Once you’ve completed the strand roll up the lights on the custom roller and you are ready to go.

• YES! You can apply a two strand Speedwrapper to a 100 bulb strand. Making it the length of a 50 bulb strand. (To make a two strand Speedwrapper, simply clip one of the holders off and reduce it from a three strand to a two strand).   This works perfectly for inside the tree when you are doing branches. You will literally cut your time by 50 percent with the 2 strand Speedwrapper.

• You can also take 3 x 50 bulb strands, apply Speedwrapper and wrap 150 bulbs in the time it would take to wrap 50 bulbs.

• You can take 2 x 50 bulb strands, apply Speedwrapper and wrap 100 bulbs in the time it would take to wrap 50 bulbs.

We provide you with a custom patent pending roller that is included with each order of Speedwrappers.

Yes! We offer pre-wrapped strands, rollers, and adapters.

We recommend placing a speed wrapper every 6 bulbs. This gives you maximum control of your new strand.

There are numerous ways to use Speedwrapper. Here are the two most common.

• Take a single 300 bulb strand of lights, apply Speedwrapper and you convert the 300 bulb strand into the length of a 100 bulb strand (It still gives you the coverage of your original 300 bulb strand.

• Take three 100 bulb strands, apply Speedwrapper and you have created a 300 bulb strand. You’ll wrap this 300 bulb strand in the time it takes to wrap 100 bulbs.

• YES! You can apply the a two strand Speedwrapper (show illustration or picture) to a 100 bulb strand. Making it the length of a 50 bulb strand. This works perfectly for inside the tree when you are doing branches. You will literally cut your time by 50 percent with the 2 strand Speedwrapper.
• You can also take 3 50 bulb strands, apply Speedwrapper and wrap 150 bulbs in the time it would take to wrap 50 bulbs.

We provide you with a custom patent pending roller that is included with each order of Speedwrappers.

Yes we offer a single 300 bulb strand with Speed wrapper applied. This means you can wrap 300 bulbs in the time it take to wrap 100 bulbs. We offer this in clear or colored lights.

We recommend placing a speed wrapper every 6 bulbs. This gives you maximum control of your new strand.

There are numerous ways to use Speedwrapper. Here are the two most common.

• Take a single 300 bulb strand of lights, apply Speedwrapper and you convert the 300 bulb strand into the length of a 100 bulb strand (It still gives you the coverage of your original 300 bulb strand.

• Take three 100 bulb strands, apply Speedwrapper and you have created a 300 bulb strand. You’ll wrap this 300 bulb strand in the time it takes to wrap 100 bulbs.

• YES! You can apply the a two strand Speedwrapper (show illustration or picture) to a 100 bulb strand. Making it the length of a 50 bulb strand. This works perfectly for inside the tree when you are doing branches. You will literally cut your time by 50 percent with the 2 strand Speedwrapper.
• You can also take 3 50 bulb strands, apply Speedwrapper and wrap 150 bulbs in the time it would take to wrap 50 bulbs.

We provide you with a custom patent pending roller that is included with each order of Speedwrappers.

Yes we offer a single 300 bulb strand with Speed wrapper applied. This means you can wrap 300 bulbs in the time it take to wrap 100 bulbs. We offer this in clear or colored lights.